Subaru Legacy 2002 Service Manual page 1118

C: CAUTION
S146001A03
¼ Wear working clothing, including a cap, protec-
tive goggles, and protective shoes during opera-
tion.
¼ Remove contamination including dirt and corro-
sion before removal, installation or disassembly.
¼ Keep the disassembled parts in order and pro-
tect them from dust or dirt.
¼ Before removal, installation or disassembly, be
sure to clarify the failure. Avoid unnecessary
removal, installation, disassembly, and replace-
ment.
D: PREPARATION TOOL
1. SPECIAL TOOLS
ILLUSTRATION
B2M3870
B2M3995
2. GENERAL PURPOSE TOOLS
TOOL NAME
Radiator cap tester
GENERAL DESCRIPTION
S146001A17
S146001A1701
TOOL NUMBER
499977100 CRANK PULLEY
WRENCH
18231AA000 CAMSHAFT
(Newly adopted tool) SPROCKET
WRENCH
S146001A1702
CO(H6)-5
¼ Be careful not to burn your hands, because each
part in the vehicle is hot after running.
¼ Be sure to tighten fasteners including bolts and
nuts to the specified torque.
¼ Place shop jacks or safety stands at the speci-
fied points.
¼ Before disconnecting electrical connectors of
sensors or units, be sure to disconnect ground
cable from battery.
DESCRIPTION
Used for stopping crankshaft pulley when loos-
ening and tightening crankshaft pulley bolts.
Used for removing and installing camshaft
sprocket.
Used for measuring pressure.
REMARKS
REMARKS
Cooling