Camshaft - Subaru Legacy 2002 Service Manual

16. Camshaft

S143092
A: REMOVAL
S143092A18
1) Remove crankshaft pulley. <Ref. to ME(H6)-39,
REMOVAL, Crankshaft Pulley.>
2) Remove front chain cover. <Ref. to ME(H6)-40,
REMOVAL, Front Chain Cover.>
3) Remove timing chain assembly. <Ref. to
ME(H6)-42, REMOVAL, Timing Chain Assembly.>
4) Remove camshaft sprockets. <Ref. to ME(H6)-
47, REMOVAL, Camshaft Sprocket.>
5) Remove crankshaft sprocket. <Ref. to ME(H6)-
48, REMOVAL, Crankshaft Sprocket.>
6) Remove rear chain cover. <Ref. to ME(H6)-49,
REMOVAL, Rear Chain Cover.>
7) Remove rocker cover (RH).
8) Loosen front camshaft cap bolts equally, a little
at a time in numerical sequence shown in the fig-
ure (RH).
9) Remove camshaft cap and intake camshaft
(RH).
CAMSHAFT
10) Loosen camshaft cap bolts equally, a little at a
time in the numerical sequence shown in the fig-
ure.
11) Remove camshaft cap and exhaust camshaft
(RH).
CAUTION:
Arrange camshaft caps in order so that they
can be installed in their original position.
12) Remove plug (LH).
B2M4062
13) Similarly, remove left-hand camshafts and
related parts.
B: INSTALLATION
1) Apply a coat of engine oil to camshaft journals
and install camshaft.
CAUTION:
When installing camshaft, adjust camshaft
front flange knock pin (A) position as follows:
B2M4063A
LH side: 12 o'clock
RH side: 10 o'clock
ME(H6)-51
Mechanical
B2M4064A
B2M4327
S143092A11
B2M4065A