Mt Gear Shift Lever - Subaru IMPREZA 2002 Service Manual

MT GEAR SHIFT LEVER
I
CONTROL SYSTEMS
8. MT Gear Shift Lever
A: REMOVAL
1) Set the vehicle on the lift.
2) Remove the gear shift knob.
3) Disconnect the ground terminal from battery.
4) Remove the console box. <Ref. to El-41, RE-
MOVAL, Console Box.>
5) Remove the boot plate from body.
@.Lift-up the vehicle.
7) Remove the rear exhaust pipe and muffler.
8) Remove the heat shield cover. (If equipped)
9) Remove the stay from transmission bracket.
(A) Stay
(B) Transmission bracket
10) Remove the rod from joint.
11) Remove the cushion rubber from body.
(A) Stay
(B) Cushion rubber
12) Remove the joint and then extract the spring
pin.
(A) Joint
(B) Spring pin
13) Lower the vehicle.
14) Remove the gear shift lever
I
CS-32