Subaru Legacy 2002 Service Manual page 1071

Mechanical
4) Temporarily tighten rear chain cover.
CAUTION:
Do not confuse the mounting positions of the
bolts.
NOTE:
Replace mounting bolts (G) with new ones.
Bolt dimension:
6 × 14
(A)
6 × 18 (Silver)
(B)
6 × 30
(C)
6 × 18
(D)
8 × 40
(E)
8 × 30
(F)
(G) 6 × 22
REAR CHAIN COVER
5) Tighten the bolts in the numerical sequence
shown in figure.
Tightening torque:
(1) to (11)
(12) to (19)
(20) to (31)
(32) to (39)
(40) to (46)
B2M4057A
6) Install water pump. <Ref. to CO(H6)-20,
INSTALLATION, Water Pump.>
7) Install oil pump relief valve. <Ref. to LU(H6)-14,
INSTALLATION, Oil Pump Relief Valve.>
8) Install
INSTALLATION, Oil Pump.>
9) Install crankshaft sprocket.
10) Install camshaft sprocket. <Ref. to ME(H6)-47,
INSTALLATION, Camshaft Sprocket.>
11) Install timing chain. <Ref. to ME(H6)-43,
INSTALLATION, Timing Chain Assembly.>
12) Install front chain cover. <Ref. to ME(H6)-40,
INSTALLATION, Front Chain Cover.>
13) Install crankshaft pulley. <Ref. to ME(H6)-39,
INSTALLATION, Crankshaft Pulley.>
ME(H6)-50
9 N·m (0.9 kgf-m, 6.5 ft-lb)
20 N·m (2.0 kgf-m, 14 ft-lb)
9 N·m (0.9 kgf-m, 6.5 ft-lb)
12 N·m (1.2 kgf-m, 8.7 ft-lb)
9 N·m (0.9 kgf-m, 6.5 ft-lb)
oil pump. <Ref. to
B2M4057B
LU(H6)-12,
B2M4054C