Subaru Legacy 2002 Service Manual page 1065

Hide thumbs Also See for Legacy 2002:

Table of Contents

4) Rotate crankshaft sprocket clockwise to align

"top mark" at 12 o'clock position as shown in the

figure. (Piston # 1 is at TDC.)

Do not rotate crankshaft and camshaft sprock-

ets until timing chain is completely routed.

5) Install the idler sprocket. (Lower)

Tightening torque:

69 N·m (7.0 kgf-m, 50.6 ft-lb)

6) Install timing chain LH.

(1) Align the timing mark (B) on crankshaft

sprocket with the matching mark (A) on timing

(2) Route timing chain LH on idler sprocket

(Lower), water pump, exhaust cam sprocket,

and intake cam sprocket in order.

TIMING CHAIN ASSEMBLY

Make sure that matching marks on the timing

chain (A) and camshaft sprocket (B) are

aligned the same way as the one on crankshaft

Tightening torque:

(3) Install chain idler. (Upper)

69 N·m (7.0 kgf-m, 50.6 ft-lb)

Chapters

Table of Contents