21
UTILITY FUNCTION
Utility is a function, which carries out connection of GOT and controller, screen display and operation method settings,
program/data control and self-check etc.
21.1
Utility Execution
For utility execution, utility has to be displayed by installing Boot OS and package data in the C drive (built in flash memory).
There are following two methods for installing Boot OS and package data.
1) GT Designer3→GOT
Via a USB interface or
Ethernet interface
GT Designer3
Installing Boot OS or Package data
2) GT Designer3→SD card→GOT
Writing
package data
GT Designer3
Refer to the following for the installation which uses GT Designer3.
GT Designer3 (GOT2000) Screen Design Manual
For the installation methods of package data with an SD card, refer to the following.
Page 389 BootOS and System Application Installation Using Data Storage
GOT
Installing
package data
Install SD
card to
SD card
the GOT
Install directly
from GT Designer3
When GOT is remote,
GOT
install using SD card
easily
21 UTILITY FUNCTION
179
21.1 Utility Execution
21