Checking Or Resetting The Error Or The Maintenance Sign; To Check The Error; To Reset The Error; System Management - Mitsubishi Electric AT-50B Instruction Book

System Management

Main Menu > System Management
Main Menu > System Management > Status List

1Checking or resetting the Error or the Maintenance Sign

Touch the 1 Status List button on the [System Management] screen.
Number of errors
Displays the number of errors.
Group names
Displays the name of the group
that includes the unit whose
Error/Filter signs are turned on.

To check the error

1. Touch the 1 [Malfunction] tab to check the number of errors, the names of the group in which the
errors occurred, the addresses of the error-source units, and the error codes.
• If an error occurs, note the error code and consult your dealer or a maintenance provider.

To reset the error

1. Touch the 1 [Malfunction] tab.
2. Touch the 2 All Reset button.
3. Touch the OK button on the pop-up window.
• Those groups whose errors have been reset will have an icon indicating that they are stopped.
1
Error source address
Displays the M-NET address
of the units whose Error/Filter
signs are turned on.
Error code
Displays the code for the error
that were detected.
2
1
2
59