Table of Contents
Advertisement
2. Introduction
TE-200A/TE-50A is a centralized controller.
TW-50A is an LCD-less total management system.
Any connected air conditioning systems can be operated or monitored on the TE-200A/TE-50A's LCD or the
Integrated Centralized Control Web.
By using a PI controller that is built-in on the TE-200A/TE-50A/TW-50A, the energy-control-related status can be
displayed and Peak Cut control can be performed without a use of a PI controller (PAC-YG60MCA).
Each TE-200A/TE-50A can control up to a total of 50 indoor units and other equipment. By connecting TE-200A
(main controller) and TE-50A/TW-50A (expansion controllers), up to 200 indoor units and other equipment can be
controlled.
TE-200A/TE-50A/TW-50A and Mitsubishi Electric's AE-200A/AE-50A/EW-50A have the same functions.
"AE-200," "AE-50," or "EW-50" is displayed instead of "TE-200A," "TE-50A," or "TW-50A" on the
TE-200A/TE-50A/TW-50A's LCD or the Integrated Centralized Control Web.
2-1. Terms used in this manual
- "Centralized Controller TE-200A" is referred to as "TE-200."
- "Centralized Controller TE-50A" is referred to as "TE-50."
- "Centralized Controller TW-50A" is referred to as "TW-50."
2-2. Required licenses
The required licenses vary, depending on the functions to be used. Refer to the License Classification List for
details. Purchase the required licenses from your dealer. Refer to section 5-2-4 for license registration.
2-3. "Group", "Block", "EM block", and "Floor" definitions
The terms "Group", "Block", "EM block", and "Floor" used in this manual are defined as follows.
Group:
Group is a group of air conditioning units and controllers and is the smallest unit that the TE-200/TE-50
can control. The maximum number of units that each group can contain is 16.
Block:
Each block consists of one or more groups. Multiple groups of units in a given block can be monitored
or operated collectively.
EM block: EM block stands for Energy management block, and this groups multiple blocks. Use for charge
apportioning units and for settings of blocks spanning TE-200 and TE-50/TW-50.
Floor:
Floor is one or more groups of units on each floor that are treated as one unit.
2-4. About this manual
This manual explains how to make basic operations of the LCD and the Integrated Centralized Control Web, and
also how to make settings required when the controller is installed. For settings methods when the controller is
installed, refer to section 5 "Initial startup settings". For further information of operation methods and function
settings such as how to monitor and operate the units other than air conditioning units, refer to the following
Instruction Books. Ask your dealer for how to obtain these Instruction Books.
AE-200A/AE-50A/EW-50A Instruction Book (Initial Settings)
AE-200A/AE-50A Instruction Book (Detailed operations)
AE-200A/AE-50A/EW-50A Instruction Book (Integrated Centralized Control Web)
* TE-200A/TE-50A/TW-50A and Mitsubishi Electric's AE-200A/AE-50A/EW-50A have the same functions. Use
these instruction books, replacing the model names AE-200A/AE-50A/EW-50A to TE-200A/TE-50A/TW-50A.
WT09304X01
6
Advertisement
Table of Contents
