Revision (Mst); Show (Mst) - Allied Telesis AT-8000S Cli Reference Manual

revision (mst)

The revision MST configuration command defines the configuration revision number. To return to the default
configuration, use the no form of this command.
Syntax
revision value
no revision
Parameters
•
value—Configuration revision number (Range: 0-65535).
Default Configuration
The default configuration revision number is 0.
Command Mode
MST Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example sets the configuration revision to 1.
Console(config) # spanning-tree mst configuration
Console(config-mst) # revision 1

show (mst)

The show MST Configuration mode command displays the current or pending MST region configuration.
Syntax
show {current | pending}
Parameters
•
current—Indicates the current region configuration.
•
pending—Indicates the pending region configuration.
Default Configuration
This command has no default configuration.
Command Mode
MST Configuration mode
Page 195
Spanning-Tree Commands