Figure 26: Loosen Grounding Screw; Figure 27: Wrap Grounding Wire Around Ground Screw; Figure 28: Secure Grounding Wire To The Switch - Allied Telesis IS Series Installation Manual

2. Loosen the grounding screw several turns with a #2 Phillips-head
screwdriver. Refer to Figure 26 on page 69.
Figure 26. Loosen Grounding Screw
3. Wrap the grounding wire clockwise around the base of the grounding
screw beneath the star-lock washer provided. Refer to Figure 27.
Figure 27. Wrap Grounding Wire Around Ground Screw
4. Tighten the screw clockwise to secure the ground wire to the switch
chassis. Refer to Figure 28.
Figure 28. Secure Grounding Wire to the Switch
IS230-10GP Industrial Ethernet Layer 2 Switch Installation Guide
69