Show Startup-Config - Allied Telesis AT-8000S Cli Reference Manual
Layer 2 ethernet switch
Hide thumbs
Also See for AT-8000S:
- Cli user's manual (403 pages) ,
- Cli reference manual (334 pages) ,
- User manual (249 pages)
Table of Contents
Advertisement
Allied Telesyn AT-8000S Switch
CLI Reference Guide
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays the contents of the running configuration file.
Console# show running-config
software version 1.1
hostname device
interface ethernet 1/e1
ip address 176.242.100.100 255.255.255.0
duplex full
speed 1000
interface ethernet 1/e2
ip address 176.243.100.100 255.255.255.0
duplex full
speed 1000
show startup-config
The show startup-config Privileged EXEC mode command displays the contents of the startup configuration file.
Syntax
show startup-config
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays the contents of the running configuration file.
Console# show startup-config
software version 1.1
hostname device
Page 64
Advertisement
Table of Contents
