The Home Screen for a temperature controlled shaker has additional
temperature controls, as shown in
Figure 27: GUI Home Screen for Temperature Controlled Shaker
3. 2. 1. Set Basic Shaker Operating Parameters
From the Home Screen you need only tap once to reach the setup screens
for major shaker operating parameters.
Set Speed
1.
Tap anywhere on the Actual Speed field (➅ in
to open the Speed Setpoint screen shown in
Figure 28: Speed setpoint
2.
Tap the arrows above or below each dial of the wheel picker to set the
desired speed. Alternatively, you can change the desired set speed by
rotating each dial of the wheel picker independently.
3.
Tap Save.
Graphical User Interface
Figure 27.
62 / 143
➀
Navigation Bar
➁
Speed Setpoint
➂
Start or Stop
➃
Info
➄
Timer – Continuous or Timed
Temperature Readout and
➅
Setpoint
➆
Actual Speed
➇
Health Status and Statistics
➈
Current Time
➉
Name of Unit
Figure 26
or ➆
Figure 27)
Figure
28.