Profibus Master In Codesys 2.3; Profibus I/O-Ipc Plc Configuration; Figure 60: Adding The Profibus Master - WAGO -I/O-IPC-C6 Manual

WAGO-I/O-SYSTEM 750
758-874/000-131 WAGO-I/O-IPC-C6
Pos: 46.10 /Serie 758 (Funk, IPC und PFC)/Feldbuskommunikation/PROFIBUS-Master 758-87x @ 10\mod_1313130561022_21.doc @ 76541 @ 1223322 @ 1
12

PROFIBUS Master in CoDeSys 2.3

12.1

PROFIBUS I/O-IPC PLC Configuration

Calling up addresses or symbolic names of inputs and outputs
Addresses or symbolic names of the inputs and outputs have to be called
explicitly, because otherwise the process image is not updated. Alternatively, you
can also create an array of max. 240 bytes at the memory addresses IB%4800 or
QB%4800. This array has to be called in the PLC program.
Before an application has access to the connected PROFIBUS network, you must
configure it in CoDeSys:
1. To integrate the PROFIBUS-I/O-IPC in the PLC configuration, right click
on "PLC Configuration" and select "Append WAGO-FB-DPM".

Figure 60: Adding the PROFIBUS master

Manual
Version 1.0.0
PROFIBUS Master in CoDeSys 2.3 135