Read Statistics; Table 47 Port-Specific Diagnostics; Table 48 Port Specific Statistical Information - WAGO 765-1103/100-000 Manual

Commissioning
The path to this node is:
Root > Object > DeviceSet > [device name] > DigitalConnector >
PortXX > Diagnostics > Flags
The following table lists port-specific diagnostic information.
Node Name
DiagnosticsPin1, Di-
agnosticsPin2, Diag-
nosticsPin4

10.3.3.1.7 Read Statistics

The OPC UA server provides nodes with statistical information. For example, the OPC
UA client can read out the maximum measured current on pin 1 of a port in the MaxCur-
rentPin1 node.
The path to this node is:
Root > Object > DeviceSet > [device name] > DigitalConnector >
PortXX > Statistics > Current / Temperature / Voltage
The following table lists port-specific statistical information:
Measurement
Current
80 Product manual | Version: 2.2.0
16DO FLD PN DC 24V 2.0A
Node Class Access
Variable Read
Node Name Node Class
MaxCurrentPin1 Variable
MaxCurrentPin2 Variable
MaxCurrentPin4 Variable
MinCurrentPin1 Variable
MinCurrentPin2 Variable
765-1103/100-000
Table 47: Port-Specific Diagnostics
Description
Diagnostics on pin 1, pin 2 or pin 4; the nu-
merical value contains bit-coded informa-
tion:
Bit 0: short circuit
Bit 1: overload protection
Bit 2: overtemperature protection
Bit 3: overvoltage protection
Bit 4: overcurrent
Bit 5: undercurrent
Bit 6: overtemperature
Bit 7: undertemperature
Bit 8: overvoltage
Bit 9: undervoltage
Bit 10: watchdog
0: diagnostics inactive
1: diagnostics active
Table 48: Port Specific Statistical Information
Access Description
Read Maximum current on
pin 1 since the value
was reset; unit: mA
Read Maximum current on
pin 2 since the value
was reset; unit: mA
Read Maximum current on
pin 4 since the value
was reset; unit: mA
Read Minimum current on
pin 1
Read Minimum current on
pin 2