194 Diagnostics
11
Diagnostics
11.1
LED Signaling
For on-site diagnostics, the fieldbus controller has several LEDs that indicate the
operational status of the fieldbus controller or the entire node (see following
figure).
Figure 77: Display Elements
The diagnostics displays and their significance are explained in detail in the
following section.
The LEDs are assigned in groups to the various diagnostics areas:
Table 56: LED Assignment for Diagnostics
Diagnostics area
Fieldbus status
Status Supply Voltage
Manual
1.5.0
750-882 Media Redundancy ETHERNET Controller
Node status
LEDs
• LINK ACT Port 1
• LINK ACT Port 2
• MS
• NS
• I/O
• USR
• A (system supply)
• B (field supply)
WAGO-I/O-SYSTEM 750