Appendix: Information For Hart Library; Codesys Library; Profibus Gateway - WAGO 750-484 Manual

38

Appendix: Information for Hart Library

5 Appendix: Information for Hart Library
To enable Hart communication, a HART library must be used which provides the
required Hart commands for the selected system.
Prior WAGO fieldbus controllers (CODESYS) and PROFIBUS systems (via
DPV1-to-Hart) are supported.
5.1

CODESYS Library

For the WAGO fieldbus controller, WAGO provides a CODESYS library that
offers a multiplicity of Hart commands that are simple to use from a CODESYS
program perspective.
The library contains all "Universal Commands" and "Common Practice
Commands." This library is constantly being improved and already contains
several common "Device Specific Commands."
Additional information for downloading the library
The library can be downloaded from the WAGO Internet site at www.wago.com
→ Support → Additional documentation and information on automation products
→ WAGO Software → WAGO-I/O-PRO / CODESYS → (right column,
"Additional Information":) Libraries → "WagoLibHART_03.lib" or by entering
the following into the address bar of the web browser:
http://www.wago.com/wagoweb/documentation/app_note/libraries/WagoLibHA
RT_03.lib
Additional information about the library and the HART commands
A detailed description of the library, as well as the implemented HART
commands, can be found at:www.wago.com → Support → Documentation →
(left navigation bar:) Application Notes → General Overview → "A116100" →
Documentation (PDF) or by entering the following into the address bar of the
web browser:
http://www.wago.com/wagoweb/documentation/app_note/a1161/a116100d.pdf
5.2

PROFIBUS Gateway

When using a PROFIBUS fieldbus coupler/controller, one option is to use a
HartToDpv1 gateway, which several manufacturers offer.
WAGO-I/O-SYSTEM 750
750-484 2 AI 4-20 mA HART Ex i
V 1.2.0 HW-Version 04, SW-Version 03
Manual