Properties
Parameters
Conductor cross-section
Reverse voltage protection
4.4.5 Electrical Safety
Property
Insulation resistance
Test voltage
Min. creepage distance
Requirements
• Use of PELV/SELV power supplies
• When SELV power supplies are used: SELV power supplies with supply via the same
network phase
• If PELV (Protective Extra Low Voltage) power supplies are used: PELV (Protective Ex-
tra Low Voltage) power supplies with a secondary power supply connection to the
common reference point
4.4.6 Environmental Conditions
Property
Surrounding air temperature (operation)
Surrounding air temperature (storage)
Maximum temperature change
Relative humidity (operation)
Pollution degree
Operating altitude
Overvoltage category
Protection type
Protection class
Vibration resistance
Shock resistance
4.4.7 Communication
Property
Communication Interfaces
Protocols
Parameters
Input data
Output data
20
Product manual | Version: 1.0.0
4PORT IOL-A FLD EC DC 24V 2.0A
Value
2
For UL-compliant use: 2.5 mm
Yes
Table 12: Electrical Safety
Value
60 VDC
550 VAC RMS
0.7 mm
Table 13: Environmental Conditions
Value
–25 °C ... +70 °C
–40 °C ... +80 °C
3 K/min
5 % ... 95 %
3 (EN 60664-1)
0 ... 2000 m
II (EN 60664-1)
IP67 (EN 60529)
III (EN 61140)
5g (IEC 60068-2-6)
50g (IEC 60068-2-27)
Table 14: Communication
Value
ETHERNET, IO-Link, Bluetooth®
EtherCAT®, HTTP, OPC UA, IO-Link
Table 15: EtherCAT
Value
7 ... 135 bytes
Operation with 4 IO-Link 32 Is / 32 Os: 135 bytes
Operation with 8 DIs: 11 bytes
Operation with 8 DOs: 7 bytes
2 ... 130 bytes
765-4203/0100-0000
®
Slave