Adding Or Replacing Components - WAGO 8FDI 24V PROFIsafe 750-662/000-004 Manual

WAGO I/O System
750-662/000-004 8FDI 24V PROFIsafe
The serial number consists of the week and year of manufacture, firmware
version (if available), hardware version, firmware loader version (if available) of
the F I/O module.
The date of manufacture (calendar week/year) marks the beginning of the
duration of usage.
The duration of use is specified in the technical data of the respective F I/O
module.
When the duration of use ends, the F I/O module must be replaced.
7.1.2

Adding or Replacing Components

Check safety functions!
If F I/O modules are added to a fieldbus node (see section "Mounting" > ... >
"Inserting and Removing Devices") or replaced (see section "Service" > ... >
"Replacing an F I/O Module"), the associated safety function should undergo
additional testing before commissioning the machine or system.
Version 1.0.0, valid from HW/SW Version 01/01
Commissioning 49
Manual