Starting Up The Bluetooth; Configuration Of The Bluetooth; Modules; Slave Using "Net Forming - WAGO I/O System 750 Quick Start Manual

2.2 Starting up the Bluetooth

1. Determine which Bluetooth
2. Write down the MAC address of the slave:

2.2.1 Configuration of the Bluetooth

1. Start the WAGO-I/O-CHECK software (Version 3 or later).
2. Click on the [Identify] button.
Your node configuration is graphically displayed (see Figure 2).
Figure 2: Identify your node configuration
3. Click with the right mouse button on the Bluetooth
WAGO-I/O-SYSTEM 750
I/O Modules
module will function as the slave.
Write down the MAC address of the master:
would like to configure as a slave.
Starting up the Bluetooth® Modules
®

Modules

®
module will function as the master and which
®

Slave Using "Net Forming"

Quick Start
0 0 : 0 6 : C 6 : _ _ : _ _ : _ _
0 0 : 0 6 : C 6 : _ _ : _ _ : _ _
®
module that you
• 9
g064462e