Abbreviations And Terms; Table 6: Abbreviations And Terms Used In This Manual - WAGO 750 Series Manual

20 Device Description
Perform configuration using the WAGO DALI Configurator!
You must use the WAGO DALI Configurator for configuration of the DALI Multi-
Master Module (753-647) and the DALI Line.
You can download the WAGO DALI Configurator as a stand-alone tool from the
WAGO Internet site at:
www.wago.com
More information about the WAGO DALI Configurator!
A detailed description of the WAGO DALI Configurator is given in the manual for
the configurator.
You can download this manual free of charge from the WAGO Internet site at:
www.wago.com
Limit the PLC cycle time to maximum 60 ms
The DALI function blocks in the PLC program must be run at least every 60 ms
for communication with the DALI Configurator.
3.2

Abbreviations and Terms

Table 6: Abbreviations and Terms Used in this Manual

Abbreviation/
Term
Control Device IEC term for the DALI (Multi)-Master (also, active sensors)
Control Gear
DALI
ECG
PI
PAA
PAE
More definitions of terms given in the glossary.
Further, detailed explanations and definitions of technical terms used in this
manual are given in alphabetical order in the section "Glossary."
Manual
Version 1.4.3
Explanation
IEC term for passive electronic ballast (actuators)
"Digital Addressable Lighting Interface"
(protocol for lighting control)
Electronic control gear (ballast unit)
Process image of I/O module
I/O module output process data
I/O module input process data
WAGO-I/O-SYSTEM 750
753-647 DALI Multi-Master