Manufacturing Number; Hardware Address (Mac Id); Figure 2: Marking Area For Serial Numbers - WAGO -I/O-SYSTEM 750 XTR Manual

WAGO-I/O-SYSTEM 750 XTR
750-352/040-000 FC ETHERNET G3 XTR
Pos : 19.8 /All e Seri en ( Allgemei ne Module)/Ü bers chriften/Ebene 2/Fertigungsnummer - Übersc hrift 2 @ 3\mod_1225444612218_21.doc x @ 24889 @ 2 @ 1
3.1

Manufacturing Number

Pos : 19.9 /Serie 750 (WAGO-I/O-SYST EM)/Systembesc hrei bung/Ger ät und Sys tem/Har dwar e-Adress e (M AC-ID) @ 7\mod_1270708464299_21.doc x @ 54960 @ 2 @ 1
3.2

Hardware Address (MAC ID)

Each FC ETHERNET G3 XTR has an internationally unambiguous physical
address, referred to as the MAC-ID (Media Access Control Identity).
As part of the labeling on the right side of this component, the MAC ID is printed
in the block diagram of the fieldbus coupler/controller.
In addition, the MAC ID is located on the paper strip with two self-adhesive peel-
off strips on the left side of the fieldbus coupler/controller.
The MAC ID has a fixed length of 6 bytes (48 bits) which are presented
hexadecimal. The first three bytes identify the manufacturer (e.g. 00:30 DE for
WAGO). The second 3 bytes comprise the unique serial number of the hardware.
Pos : 19.10.1 /Serie 750 ( WAGO-I/O- SYST EM)/Gerätebeschr eibung ( alte Struktur)/Bedruc kung/F ertigungsnummer 750- xxxx - Einl eitung F BK/PFC @ 24\mod_1444111422821_21.doc x @ 192825 @ @ 1
The serial number indicates the delivery status directly after production. This
number is part of the labeling on the side of each component.
Pos : 19.10.2 /Serie 750 ( WAGO-I/O- SYST EM)/Gerätebeschr eibung ( alte Struktur)/Bedruc kung/F ertigungsnummer 750- xxxx - Abbildung und Erläuterung @ 24\mod_1443678328855_21.doc x @ 192638 @ @ 1

Figure 2: Marking Area for Serial Numbers

There are two serial numbers in two rows in the side marking. They are left of the
release tab. The first 10 positions in the longer row of the serial numbers contain
version and date identifications.
Example structure of the rows: 0114010101...
01
WW
Calendar
week
The row order can vary depending on the production year, only the longer row is
relevant. The back part of this and the shorter row contain internal administration
information from the manufacturer.
Pos : 19.10.3 /Serie 750 ( WAGO-I/O- SYST EM)/Gerätebeschr eibung ( alte Struktur)/Bedruc kung/F ertigungsnummer 750- xxxx - Z us atz: auf Abdec kkl appe der Ser vice- Sc hnittstelle g edr uc kt @ 29\mod_1489502084341_21.doc x @ 413518 @ @ 1
14 01
YY FW --
Year Firmware Hardware
version
01 01
HW FL
Firmware
version loader
version
System Description
(additional positions)
-
Internal information
Manual
Version 1.3.0
21