Setting Bus Address And Operating Mode; Setting Of The Dip Switches; Figure 17: Dip Switch Module; Figure 18: Setting Of The Dip Switches - WAGO WINSTA 770 Manual

WAGO WINSTA® 770
770-629/130-000 WINSTA® Sunblind Box 4 Channel
7.4

Setting Bus Address and Operating Mode

The sunblind box has two DIP switch modules with which you can set the bus
address, the grouping of the motors, the moving time, and the moving logic.

Figure 17: DIP switch module

7.4.1

Setting of the DIP Switches

For the settings, the following conventions apply:

Table 16: Setting of the DIP switches

Figure 18: Setting of the DIP
switches
Manual
Version 1.2.0, valid from HW/FW version XXXX0201XX
View Meaning
White field Position of the switch
Grayed out Not relevant
In the example: DIP1 = off, DIP2 = on
Commissioning 35