Manufacturing Number; Hardware Address (Mac Id); Figure 2: Marking Area For Serial Numbers - WAGO 750-370 Manual

WAGO-I/O-System 750
750-370 PROFINET IO Fieldbus Coupler
Pos : 18.6 /All e Seri en ( Allgemei ne Module)/Ü bers chriften für alle Serien/Systembesc hrei bungFertig ungs nummer - Ü bersc hrift 2 @ 3\mod_1225444612218_21.doc x @ 24889 @ 2 @ 1
3.1

Manufacturing Number

Pos : 18.7.1 /Serie 750 (WAGO-I/O-SYST EM)/Gerätebesc hrei bung/Bedruc kung/Fertig ungs nummer 750- xxxx - Ei nleitung FBK/PFC @ 24\mod_1444111422821_21.doc x @ 192825 @ @ 1
The serial number indicates the delivery status directly after production. This
number is part of the labeling on the side of each component.
In addition, the serial number is printed on the cover cap of the configuration and
programming interface of the fieldbus coupler/controller, so that it can also be
read when installed.
Pos : 18.7.2 /Serie 750 (WAGO-I/O-SYST EM)/Gerätebesc hrei bung/Bedruc kung/Fertig ungs nummer 750- xxxx - Abbil dung und Erläuterung @ 24\mod_1443678328855_21.doc x @ 192638 @ @ 1

Figure 2: Marking Area for Serial Numbers

There are two serial numbers in two rows in the side marking. They are left of the
release tab. The first 10 positions in the longer row of the serial numbers contain
version and date identifications.
Example structure of the rows: 0114010101...
01
WW
Calendar
week
The row order can vary depending on the production year, only the longer row is
relevant. The back part of this and the shorter row contain internal administration
information from the manufacturer.
Pos : 18.8 /Serie 750 (WAGO-I/O-SYST EM)/Systembesc hrei bung/Ger ät und Sys tem/Har dwar e-Adress e (M AC-ID) @ 7\mod_1270708464299_21.doc x @ 54960 @ 2 @ 1
3.2

Hardware Address (MAC ID)

Each PROFINET IO Fieldbus Coupler has an internationally unambiguous
physical address, referred to as the MAC-ID (Media Access Control Identity).
As part of the labeling on the right side of this component, the MAC ID is printed
in the block diagram of the fieldbus coupler/controller.
In addition, the MAC ID is located on the paper strip with two self-adhesive peel-
off strips on the left side of the fieldbus coupler/controller.
Manual
Version 2.0.0
14 01
YY FW --
Year Firmware Hardware
version
01 01
HW FL
Firmware
version loader
version
System Description
(additional positions)
-
Internal information
19