WAGO-I/O-SYSTEM 750
758-874/000-110 WAGO-I/O-IPC-C6
Pos: 41.5 /Serie 758 (Funk, IPC und PFC)/In Betrieb nehmen/In Betrieb nehmen 758-87x 4 @ 11\mod_1315222587717_21.doc @ 78212 @ @ 1
3.
To change the X8 Ethernet interface, select TCP/IP Configuration eth0 or
TCP/IP Configuration eth1 for the X9 Ethernet interface. Then press the
[Enter] key.
In this example, the X8 Ethernet interface is selected to change the pre-set
IP address:
Figure 25: TCP/IP configuration eth0 (X8)
4.
Select IP address and press the [Enter] key.
Figure 26: IP address
Manual
Version 2.3.0
Commissioning
61