Figure 26: Tcp/Ip Configuration Eth0 (X8); Figure 27: Ip Address; 758-874/000-131 Wago-I/O-Ipc-C6 - WAGO -I/O-IPC-C6 Manual

66 Commissioning
Pos: 41.5 /Serie 758 (Funk, IPC und PFC)/In Betrieb nehmen/In Betrieb nehmen 758-87x 4 @ 11\mod_1315222587717_21.doc @ 78212 @ @ 1
3. To change the X8 Ethernet interface, select TCP/IP Configuration eth0 or
TCP/IP Configuration eth1 for the X9 Ethernet interface. Then press the
[Enter] key.
In this example, the X8 Ethernet interface is selected to change the pre-set
IP address:

Figure 26: TCP/IP configuration eth0 (X8)

4. Select IP address and press the [Enter] key.

Figure 27: IP address

WAGO-I/O-SYSTEM 750

758-874/000-131 WAGO-I/O-IPC-C6

Manual
Version 1.0.0