Tcp/Ip Configuration" Page; Table 66: Wbm "Tcp/Ip Configuration" Page - "Tcp/Ip Configuration" Group - WAGO Compact Controller 100 Manual

136 Appendix

15.1.1.2.2 "TCP/IP Configuration" Page

The TCP/IP settings for the ETHERNET interfaces are shown on the "TCP/IP
configuration" page.
"TCP/IP Configuration" Group
The properties are displayed in a separate area for each configured bridge.
Table 66: WBM "TCP/IP Configuration" Page – "TCP/IP Configuration" Group
Parameter
Network Details Bridge <n> Settings for the bridge currently configured
Current IP Address
Current Subnet Mask
IP Source
IP Address
Subnet Mask
Click the [Submit] button to apply a change. The change takes effect
immediately.
Manual
Version 1.1.0, valid from FW Version 03.08.07(20)
751-9301 Compact Controller 100
Meaning
This displays the current IP address.
This displays current subnet mask.
You can specify whether to use a static or dynamic
IP address.
Static IP Static IP addressing
DHCP Dynamic IP addressing via DHCP
BootP Dynamic IP addressing via BootP
Enter a static IP address. This is enabled if "Static
IP" is enabled in the Configuration Type field.
Enter the subnet mask. This is enabled if "Static IP"
is enabled in the Configuration Type field.
WAGO I/O System Compact