Show Redundancy Status - Cisco Nexus 7000 Series Reference Manual

Show Commands

show redundancy status

To show detailed information about redundancy, use the show redundancy status command.
Syntax Description
This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to displays redundancy information:
switch# show redundancy status
Redundancy mode
---------------
This supervisor (sup-6)
-----------------------
Other supervisor (sup-5)
------------------------
System start time:
System uptime:
OL-25806-03
show redundancy status
Modification
This command was introduced.
administrative: HA
operational: None
Redundancy state: Active
Supervisor state: Active
Internal state: Active with no standby
Redundancy state: Not present
Supervisor state: N/A
Internal state: N/A
Cisco Nexus 7000 Series NX-OS System Management Command Reference
Fri Aug 15 15:55:19 2008
3 days, 23 hours, 57 minutes, 22 seconds
show redundancy status
613