Logging Module - Cisco Nexus 7000 Series Reference Manual

L Commands

logging module

To enable module log messages, use the logging module command. To disable module log messages,
use the no form of this command.
Syntax Description severity-level
Defaults
None
Command Modes
Global configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
4.0(1)
Usage Guidelines
This command does not require a license.
Examples This example shows how to enable module log messages:
switch# configure terminal
switch(config)# logging module
switch(config)#
OL-25806-03
logging module [severity-level]
no logging module
(Optional) Number of the desired severity level at which messages should be
logged. Messages at or numerically lower than the specified level are logged.
Severity levels are as follows:
0—emergency: System unusable
•
1—alert: Immediate action needed
•
2—critical: Critical condition
•
• 3—error: Error condition
4—warning: Warning condition
•
5—notification: Normal but significant condition—default level
•
6—informational: Informational message only
•
7—debugging: Appears during debugging only
•
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
logging module
253