Show Sprom - Cisco Nexus 7000 Series Reference Manual

show sprom

show sprom
To display the contents of the serial PROM (SPROM) on the device, use the show sprom command.
Syntax Description all
backplane bp-number
clock clock-number
cmp
fan fan-number
module slot
powersupply ps-number
stby-sup
sup
xbar xbar-number
Defaults Displays summary information for all processes on the device.
Command Modes Any command mode
Supported User Roles network-admin
vdc-admin
network-operator
vdc-operator
Command History Release
4.0(1)
Usage Guidelines The SPROM on the physical device components contain detailed information about the hardware,
including the serial number, part number, and revision numbered.
This command does not require a license.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
650
show sprom {all | backplane bp-number | clock clock-number | cmp | fan fan-number | module slot
| powersupply ps-number | stby-sup | sup | xbar xbar-number}
Displays the SPROM contents for all components on the physical device.
Displays the SPROM contents for a backplane.
Displays the SPROM contents for a clock module.
Displays the SPROM contents for a Connectivity Management Processor
(CMP).
Displays the SPROM contents for a fan.
Displays the SPROM contents for a I/O module.
Displays the SPROM contents for a power supply.
Displays the SPROM contents for the standby supervisor module.
Displays the SPROM contents for the active supervisor module.
Displays the SPROM contents for a fabric module.
Modification
This command was introduced.
Show Commands
OL-25806-03