Show Ntp Status - Cisco Nexus 7000 Series Reference Manual

Show Commands

show ntp status

To display the Network Time Protocol (NTP) distribution status, use the show ntp status command.
Syntax Description
This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.1(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to display the NTP distribution status:
switch(config)# show ntp status
Distribution : Disabled
Last operational state: No session
switch(config)#
Related Commands Command
show ntp source
show ntp peers
OL-25806-03
show ntp status
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
Description
Displays information about the NTP source.
Displays information about NTP peers.
show ntp status
573