Distribute - Cisco Nexus 7000 Series Reference Manual

D Commands

distribute

To enable Cisco Fabric Service (CFS) to distribute configurations, use the distribute command. To
disable distribution, use the no form of this command.
Syntax Description radius
tacacs+
Defaults
None
Command Modes Call home configuration mode
Global configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
4.1(2)
Usage Guidelines This command does not require a license.
To enable CFS to distribute role configurations, see the role distribute command.
Examples
This example shows how to enable CFS to distribute Call home configurations:
switch(config)# callhome
switch(config-callhome)# distribute
This example shows how to enable CFS to distribute RADIUS configurations:
switch(config)# distribute radius
This example shows how to enable CFS to distribute TACACS+ configurations:
switch(config)# distribute tacacs+
OL-25806-03
distribute [radius | tacacs+]
no distribute
(Optional) Specifies CFS to distribute RADIUS configurations.
(Optional) Specifies CFS to distribute TACACS+ configurations.
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
distribute
133