E Commands
event manager clear counter
To specify an Embedded Event Manager (EEM) counter to clear, use the event manager clear counter
command.
Syntax Description
counter-name
Defaults
None
Command Modes
Embedded event manager
Supported User Roles
network-admin
vdc-admin
Command History
Release
4.0(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to clear an EEM counter:
switch# configure terminal
switch(config)# event manager clear counter eem-counter
switch(config)#
OL-25806-03
event manager clear counter counter-name
Name of the counter to clear.
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
event manager clear counter
151