Logging Level - Cisco Nexus 7000 Series Reference Manual

L Commands

logging level

To enable logging messages from the defined facility that have the specified severity level or higher, use
the logging level command. To disable logging messages from the defined facility, use the no form of
this command.
Syntax Description facility
severity-level
Defaults None
Command Modes Global configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
4.0(1)
Usage Guidelines
This command does not require a license.
OL-25806-03
logging level facility severity-level
no logging level facility severity-level
Appropriate facility. The facilities are listed in the
Facilities" section on page
To apply the same severity level to all facilities, use the all facility.
Number of the desired severity level at which messages should be logged.
Messages at or numerically lower than the specified level are logged. Severity
levels are as follows:
• 0—emergency: System unusable
1—alert: Immediate action needed
•
2—critical: Critical condition—default level
•
3—error: Error condition
•
4—warning: Warning condition
•
5—notification: Normal but significant condition
•
6—informational: Informational message only
•
• 7—debugging: Appears during debugging only
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
"System Message Logging
715.
logging level
247