Show Startup-Config Cdp - Cisco Nexus 7000 Series Reference Manual

Show Commands

show startup-config cdp

To display the Cisco Discovery Protocol (CDP) startup configuration, use the show startup-config cdp
command.
Syntax Description all
Defaults None
Command Modes
Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.1(2)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display the CDP startup configuration with defaults:
switch(config)# show startup-config cdp all
!Command: show startup-config cdp
!Time: Tue Feb
version 5.0(2)
logging level cdp 6
switch(config)#
OL-25806-03
show startup-config cdp [all]
(Optional) Displays the startup configuration with defaults.
Modification
This command was introduced.
2 22:36:26 2010
Cisco Nexus 7000 Series NX-OS System Management Command Reference
show startup-config cdp
653