Show Monitor Session - Cisco Nexus 7000 Series Reference Manual

Show Commands

show monitor session

To display information about an Ethernet Switched Port Analyzer (SPAN) or a Encapsulated Remote
Switched Port Analyzer (ERSPAN) session for analyzing traffic between ports, use the show monitor
session command.
Syntax Description all
session_number
range session_range
brief
Defaults Displays a brief summary of information for all configured SPAN or ERSPAN sessions.
Command Modes
Any command mode
Supported User Roles
network-admin
vdc-admin
network-operator
vdc-operator
Command History Release
6.1(1)
4.0(1)
Usage Guidelines This command does not require a license.
Examples
This example shows how to display information for all configured ERSPAN sessions:
switch(config)# show monitor session 2
---------------
type
state
erspan-id
vrf-name
acl-name
ip-ttl
ip-dscp
destination-ip
OL-25806-03
show monitor session {all | session_number | range session_range} [brief]
Displays information about all SPAN or ERSPAN sessions.
Specified SPAN or ERSPAN session number.
Displays information about the specified range of SPAN or ERSPAN
sessions.
(Optional) Displays a brief summary of the information for the specified
SPAN or ERSPAN session.
Modification
Changed the command output for ERSPAN-source sessions.
This command was introduced.
session 2
: erspan-source
: up
: 100
: default
: acl-name not specified
: 255
: 0
: 10.1.1.2
Cisco Nexus 7000 Series NX-OS System Management Command Reference
show monitor session
559