Show Snmp User - Cisco Nexus 7000 Series Reference Manual

show snmp user

show snmp user
To display the Simple Network Management Protocol (SNMP) users, use the show snmp user
command.
Syntax Description username
engineID id
Defaults Displays all users
Command Modes Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
648
show snmp user [username [engineID id]]
(Optional) Name of the user. The name can be any case-sensitive, alphanumeric
string up to 32 characters.
(Optional) Configures the SNMP Engine ID for a notification target user. The ID
is 11 decimal values separated by colons.
Modification
This command was introduced.
Show Commands
OL-25806-03