Show Lldp Traffic Interface Ethernet - Cisco Nexus 7000 Series Reference Manual

show lldp traffic interface ethernet

show lldp traffic interface ethernet
To display the number of Link Layer Discovery Protocol (LLDP) packets sent and received on the
interface, use the show lldp traffic interface ethernet command.
Syntax Description slot/port-number Slot number and port number in this format: slot/port-number. The range is from 1
Defaults
None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to display the number of LLDP packets sent and received on the interface:
switch(config)# show lldp traffic interface ethernet 7/1
LLDP interface traffic statistics:
switch(config)#
Cisco Nexus 7000 Series NX-OS System Management Command Reference
528
show lldp traffic interface ethernet slot/port-number
to 253.
Modification
This command was introduced.
Total frames transmitted: 0
Total entries aged: 0
Total frames received: 0
Total frames received in error: 0
Total frames discarded: 0
Total unrecognized TLVs: 0
Show Commands
OL-25806-03