Cisco Nexus 7000 Series Reference Manual page 60

callhome
callhome
To enter the CLI Call home configuration mode, use the callhome command.
Syntax Description
This command has no arguments or keywords.
Defaults Disabled
Command Modes Global configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to enter the Call home configuration mode:
switch(config)# callhome
switch(config-callhome)#
Related Commands snmp-server contact
email-contact
phone-contact
streetaddress
contract-id
customer-id
site-id
switch-priority
destination-profile
enable
callhome test
Cisco Nexus 7000 Series NX-OS System Management Command Reference
32
callhome
Modification
This command was introduced.
Specifies or modifies the snmp-server contact name for Call home.
Specifies the e-mail address of the person responsible for the device.
Specifies the phone number of the person responsible for the device.
Specifies the street address of the person responsible for the device.
Specifies the service agreement contract number for this device.
Specifies the service agreement customer number for this device.
Specifies the site ID number for this device.
Specifies the priority number for this device.
Creates and configures a Call home destination profile.
Enables Call home. By default, Call home is disabled.
Sends a test message to all configured destinations.
C Commands
OL-25806-03