Snmp-Server Contact - Cisco Nexus 7000 Series Reference Manual

S Commands

snmp-server contact

To configure the Simple Network Management Protocol (SNMP) contact information, use the
snmp-server contact command. To remove the contact information, use the no form of this command.
Syntax Description contact-info
Defaults A zero-length string
Command Modes Global configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
4.0(1)
Usage Guidelines
Use the snmp-server contact command to configure the SNMP sysContact variable.
This command does not require a license.
Examples
This example shows how to configure the SNMP contact:
switch# configure terminal
switch(config)# snmp-server contact Jane Smith@anyplace.com
Related Commands Command
show snmp
OL-25806-03
snmp-server contact [contact-info]
no snmp-server contact [contact-info]
(Optional) SNMP contact information (sysContact). The name can be any
alphanumeric string up to 255 characters.
Modification
This command was introduced.
Description
Displays information about SNMP.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
snmp-server contact
375