Snmp-Server Mib Community-Map - Cisco Nexus 7000 Series Reference Manual

snmp-server mib community-map

snmp-server mib community-map
To configure the Simple Network Management Protocol (SNMP) version 2c community to context
mapping, use the snmp-server mib community-map command. To remove the community to context
mapping, use the no form of this command.
Syntax Description
community-string
context
context-name
Defaults
None
Command Modes Global configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
4.0(2)
Usage Guidelines Use the snmp-server mib community-map command to map between SNMPv2c communities and
SNMP contexts. Use the snmp-server context command to map this context to a logical network entity.
For more information on context mapping, see the Cisco Nexus 7000 Series NX-OS Security
Configuration Guide, Release 6.x.
This command does not require a license.
Examples
This example shows how to map the public community to the public1 context:
switch# configure terminal
switch(config)# snmp-server mib community-map public context public1
Cisco Nexus 7000 Series NX-OS System Management Command Reference
388
snmp-server mib community-map community-string context context-name
no snmp-server mib community-map community-string context context-name
SNMP community string. The string can be any alphanumeric string up to 32
characters.
Specifies the SNMP context. The name can be any alphanumeric string up to 32
characters.
Modification
This command was introduced.
S Commands
OL-25806-03