Show Lldp Neighbors - Cisco Nexus 7000 Series Reference Manual

Show Commands

show lldp neighbors

To display the status of the Link Layer Discovery Protocol (LLDP) neighbor device, use the show lldp
neighbors command.
Syntax Description detail
interface
ethernet
slot/port-number Slot number and port number in this format: slot/port-number. The range is from 1
Defaults None
Command Modes Any command mode
Supported User Roles
network-admin
vdc-admin
network-operator
vdc-operator
Command History Release
5.0(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to display the LLDP neighbor device status:
switch(config)# show lldp neighbors detail
Capability codes:
(R) Router, (B) Bridge, (T) Telephone, (C) DOCSIS Cable Device
(W) WLAN Access Point, (P) Repeater, (S) Station, (O) Other
Local Intf
Eth8/24
Eth8/23
switch(config)#
OL-25806-03
show lldp neighbors {detail | interface ethernet slot/port-number}
Displays LLDP neighbor detail information.
Specifies the interface for which you are displaying LLDP infromation.
to 253.
Modification
This command was introduced.
Chassis ID
0018.bad8.5e45
0018.bad8.5e45
Cisco Nexus 7000 Series NX-OS System Management Command Reference
Port ID Hold-time
Eth8/23 120
Eth8/24 120
show lldp neighbors
Capability
R
R
523