Show Hardware Feature-Capability - Cisco Nexus 7000 Series Reference Manual

show hardware feature-capability

show hardware feature-capability
To display information about the registered features that are supported by the system, use the show
hardware feature-capability command.
Syntax Description detailed
Defaults None
Command Modes
Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Release
4.2(1)
Usage Guidelines
This command does not require a license.
Examples This example shows how to display information about the registered features that are supported by the
system:
switch# show hardware feature-capability detailed
Hardware Dependent Features:
. = supported
X = unsupported
-- Module --
7 12
VPC X X
module 7: Device Min num too small for feature
module 12: Device Min num too small for feature
PVLAN . .
switch#
Related Commands Command
show hardware
capacity
Cisco Nexus 7000 Series NX-OS System Management Command Reference
490
show hardware feature-capability [detailed]
(Optional) Displays detailed information about registered features.
Modification
This command was introduced.
Description
Displays information about the hardware capabilities and current hardware
utilization by the system.
Show Commands
OL-25806-03