Show Flow Record - Cisco Nexus 7000 Series Reference Manual

Show Commands

show flow record

To display the status and statistics of a Flexible NetFlow flow record, use the show flow record
command.
Syntax Description name record-name
netflow ipv4 record
netflow-original
Defaults Information for all flow exporters configured on the router is displayed.
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines You must have already enabled traffic monitoring with Flexible NetFlow using an exporter before you
can use the show flow exporter command.
Table 5
Table 5
original-input
original-output
protocol-port
This command does not require a license.
Examples
This example shows how to display the status and statistics of the original input NetFlow record:
OL-25806-03
show flow record [name record-name | netflow ipv4 record | netflow-original]
(Optional) Specifies the name of a flow record that you previously
configured.
(Optional) Configures the flow monitor to use one of the predefined records.
See
(Optional) Specifies the Flexible NetFlow implementation of original
NetFlow with origin autonomous systems.
Modification
This command was introduced.
describes the keywords and descriptions for the record argument.
Keywords and Descriptions for the record Argument
Traditional IPv4 input NetFlow.
Traditional IPv4 output NetFlow.
Protocol ports record.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
Table 5 for a listing of the available records and their definitions.
show flow record
487