Show Ntp Peers - Cisco Nexus 7000 Series Reference Manual

show ntp peers

show ntp peers
To display the configured Network Time Protocol (NTP) servers and peers, use the show ntp peers
command.
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes
Any command mode
Supported User Roles
network-admin
vdc-admin
network-operator
vdc-operator
Command History Release
5.0(1)
Usage Guidelines A domain name is resolved only when you have a domain name server (DNS) server configured.
This command does not require a license.
Examples This example shows how to display all the configured NTP servers and peers:
switch(config)# show ntp peers
--------------------------------------------------
Peer IP Address
--------------------------------------------------
2001:db8::4101
192.0.2.10
switch(config)#
Related Commands Command
ntp server
ntp peer
show ntp peer-status
Cisco Nexus 7000 Series NX-OS System Management Command Reference
568
show ntp peers
Modification
This command was introduced.
Description
Configures an NTP server.
Configures an NTP peer.
Displays the status of all the server and peers.
Serv/Peer
Peer (configured)
Server (configured)
Show Commands
OL-25806-03