Show Logging Level - Cisco Nexus 7000 Series Reference Manual

show logging level

show logging level
To display a logging configuration, use the show logging level command.
Syntax Description
level
Defaults None
Command Modes
Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
4.0(2)
4.1(2)
Usage Guidelines This command does not require a license.
Examples
This example shows how to display the current Cisco Fabric Services (CFS) logging configuration:
switch# show logging level cfs
Facility
--------
cfs
0(emergencies)
3(errors)
6(information)
Related Commands Command
logging level
Cisco Nexus 7000 Series NX-OS System Management Command Reference
536
show logging level [level]
(Optional) Logging configuration to display. The keyword options are listed in
the "System Message Logging Facilities" section on page
Modification
This command was introduced.
Added the interface-vlan, netstack, private-vlan, and ipv6 keywords.
Added the cfs keyword.
Default Severity
----------------
3
1(alerts)
4(warnings)
7(debugging)
Description
Configures the facility logging level.
Current Session Severity
------------------------
3
2(critical)
5(notifications)
Show Commands
715.
OL-25806-03