Show Diagnostic Description Module - Cisco Nexus 7000 Series Reference Manual

Show Commands

show diagnostic description module

To display information about a diagnostic test for a module, use the show diagnostic description nodule
command.
Syntax Description slot
test
test-ID
test-name
all
Defaults None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display a diagnostic description for a module:
switch# show diagnostic description module 6 test 1
ManagementPortLoopback :
Related Commands Command
show diagnostic
content
OL-25806-03
show diagnostic description module slot test {test-ID | test-name | all}
Diagnostic description slot number. The slot range is from 1 to 10.
(Optional) Displays the diagnostic test selection.
(Optional) Test ID. The range is from 1 to 14.
(Optional) Test name. The test name can be any case-sensitive, alphanumeric string
up to 32 characters.
(Optional) Displays the test description for all tests on all modules.
Modification
This command was introduced.
A bootup test that tests loopback on the management port of
the module
Description
Displays diagnostic test names and test IDs.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
show diagnostic description module
455