Show Running-Config Monitor - Cisco Nexus 7000 Series Reference Manual

show running-config monitor

show running-config monitor
To display information about the running Ethernet Switched Port Analyzer (SPAN) configuration on the
system, use the show running-config monitor command.
Syntax Description all
Defaults None
Command Modes
Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display the running SPAN configuration on the system:
switch(config)# show running-config monitor
!Command: show running-config monitor
!Time: Fri Jan 15 22:24:43 2010
version 5.0(2)
logging level monitor 6
switch(config)#
Related Commands Command
show monitor
show startup-config
monitor
Cisco Nexus 7000 Series NX-OS System Management Command Reference
624
show running-config monitor [all]
(Optional) Displays the running SPAN configuration with defaults.
Modification
This command was introduced.
Description
Displays information about the SPAN configuration.
Displays information about the startup SPAN configuration.
Show Commands
OL-25806-03