Event Manager Environment - Cisco Nexus 7000 Series Reference Manual

E Commands

event manager environment

To set an Embedded Event Manager (EEM) environment variable, use the event manager environment
command. To disable an EEM environment variable, use the no form of this command.
Syntax Description varname
varvalue
Defaults None
Command Modes Embedded event manager
Supported User Roles
network-admin
vdc-admin
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples
This example shows how to set an EEM environment variable:
switch# configure terminal
switch(config)# event manager environment _cron_entry 0-59/2 0-23/1 * * 0-7
switch(config)#
OL-25806-03
event manager environment varname varvalue
no event manager environment varname
Name of the EEM environment variable.
String of characters, including embedded spaces, to be placed in the environment
variable varname.
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
event manager environment
153