Cisco Nexus 7000 Series Reference Manual page 242

header-type
header-type
To set the ERSPAN source version, use the header-type command. To disable this feature, use the no
form of this command.
Syntax Description version
Defaults
Enabled and is the recommended state.
Command Modes Global configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
6.1(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to change the ERSPAN source session from Type II to Type III:
switch# configure terminal
switch(config)# monitor session 3 type erspan-source
switch(config-erspan-src)# header-type 3
switch(config-erspan-src)#
Related Commands Command
show logging onboard
Cisco Nexus 7000 Series NX-OS System Management Command Reference
214
header-type version
no header-type version
(Optional) specifies the ERSPAN source version 3.
Modification
This command was introduced.
Description
Displays onboard failure logs.
H Commands
OL-25806-03