Clear Rmon - Cisco Nexus 7000 Series Reference Manual

C Commands

clear rmon

To delete the Remote Network Monitoring (RMON) tables from a simple network management protocol
(SNMP) notification, use the clear rmon command.
Syntax Description alarms
events
hcalarms
all-alarms
Defaults None
Command Modes Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.1(2)
Usage Guidelines This command does not require a license.
Examples This example shows how to delete RMON tables:
switch(config)# clear rmon alarms
switch(config)#
Related Commands Command
clear snmp counters
OL-25806-03
clear rmon {alarms | events | hcalarms | all-alarms}
Clears all 32-bit alarms.
Clears the RMON log and also clears the RMON event table.
Clears all 64-bit RMON alarms.
Clears all 32-bit and 64-bit RMON alarms.
Modification
This command was introduced.
Description
Deletes SNMP counters.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
clear rmon
71